Fluorescent and with reflective tape. Two-toned. Has a water-repellent finish. Triple stitched seams at leg and crotch. Low waist and form cut waist band. Ergonomically formed trouser leg. Belt loops. Fly with zip. D-ring. Front pockets. Back pockets with reinforcement, flap and hidden press studs. Adjustable hammer loop. Reinforced thigh pocket with additional pockets; an inner phone pocket as well as an external phone pocket with flap and magnetic closure. Ruler pocket with CORDURA® reinforced opening. Adjustable kneepad pockets in durable CORDURA® (500 D) with flap and top access. Vertical reflexes on the side of the legs for better safety. Each standard leg length can be lengthened by 3 cm by releasing the internal red stitching. We recommend 00418-100, 00718-100, 50451-916 and 20118-915 kneepads for this model. Co-certified together with kneepad type SHORT or LONG in accordance with EN 14404.
OEKO-TEX® STANDARD 100 - OEKO-TEX® STANDARD 100
EN ISO 20471 - class 2 - EN ISO 20471 - class 2
Hi-Vis Group Y - Hi-Vis Group Y
- OEKO-TEX® STANDARD 100
- EN ISO 20471 - class 2
- Hi-Vis Group Y
The product is certified with a maximum logo area of 0,1400m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement::
- Workwear logo. Left back pocket. Max 10x5 cm/3.9x1.9 inches
- Workwear logo. Right back pocket. Max 10x5 cm/3.9x1.9 inches
- Workwear logo. Vertical on left thigh, read from the bottom upwards. Max 25x5 cm/9.8x1.9 inches
- Workwear logo. Horizontal on left thigh. Max 11x5 cm/4.3x1.9 inches
- Workwear logo. Vertical on right thigh, read from the top downwards. Max 25x5 cm/9.8x1.9 inches
- Workwear logo. Horizontal on right thigh. Max 11x5 cm/4.3x1.9 inches
- Workwear logo. Special placement. Contact to discuss further
Man
Woman
Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
No liability accepted for product alterations.