Ripstop.The product is certified to retain its qualities with 50 domestic washes.
Wash according to ISO 6330. Wash together with like colours/textiles.
Machine wash max 60ºC.
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Clarify between local legislation and chemical supplier.
Close any zippers before washing.
Fluorescent and with vertical and chevroned crossed reflective strips. Two-toned. Breathable, wind and waterproof. Taped seams. Padded. Quilt lining in sleeves. High collar. Ribbed inner collar. Detachable lined hood can be adjusted to fit over a helmet via drawstring. Fastening with zip and storm flap with press studs. Zipped inner pockets under storm flap - one designed especially for a mobile with holes for headset wire and guide loops to keep wire accessible. Zipped pocket under stormflap large enough to hold a 9.4 inches tablet. Chest pocket with zip. Chest pocket with flap and press stud. D-ring. Ergonomically shaped sleeves allows high freedom of movement. Front pockets with zip. Internal drawstring adjustment at the hip. Zip at lower back for logo printing/ embroidery. Extended back. Waterproof pen pocket. Rib (hidden in storm flap) at cuffs. CORDURA® fabric reinforced cuffs with press stud fastening. Adjustable wire on both sides of the hood.
The product is certified with maximum 0,0200m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The area listed below is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the above instructions on logo size must be observed.
No liability accepted for product alterations.