Products

F0303-901 Safety Shoe

S3 - laces

MASCOT® FOOTWEAR MOVE

Sizes

1039

1040

1041

1042

1043

1044

1045

1046

1047

1048

Locate distributor Contact MASCOT

Compare Remove comparison
Add to Favourites Remove from Favourites

Download PDF

Product Information

Flexible
Footwear with this symbol is extremely flexible where the shoes bend. This gives you more freedom to move around as you need to during the workday. Freedom for your feet.
Lightweight
The symbol indicates that the safety footwear has a much lower weight than average. Choose footwear with this symbol, if you are looking for flexible and lightweight footwear.
Metal free
Footwear with this symbol contains no metal. The midsole, toe cap and eyelets are entirely metal-free. As such, the footwear is very useful, for example, in airports.
Composite toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The composite toe cap does not contain metal. As composite is not thermally conductive it provides comfort in cold and warm environments.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Non-marking sole – no scuff marks
Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
Ultra slip resistant sole
Excellent traction with ultra slip resistant soles. Approved by both SRA (tested with soap on ceramics) and SRB (tested with glycerol on steel), which automatically achieves the best standard for slip-resistant soles, SRC.
Water-resistant in accordance with the standard
WRU is short for Water Repellent Upper and indicates that the upper material is water-repellent.
Rubber sole material, resistant to 300°C contact heat
Rubber is very heat resistant and can resist temperatures up to 300°C contact heat.

The front part of the shoe bends flexibly with the foot.
The composite toecap is completely free of metal. The composite material does not conduct heat or cold, so the composite toecap provides extra comfort in both hot and cold surroundings.
The flexible nail protection of special textile increases comfort and protects against cold.
Shock-absorbing, light and flexible insole.
Midsole of Phylon that gives the shoes a comfortable elastic comfort, and outer sole in rubber.
The weight of the footwear is among the lowest on the market.
ESD Approved.

Oil Nubuck leather

Size 42: 540 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Technical info
Certifications
User

Metal free. Uppers of oil nubuck leather. Lace fastening. Composite toe cap. Nail protection of special textile material. Shock-absorbing, soft and flexible insole. Insoles are removable. Midsole of phylon. Sole of rubber. Heel reinforcement. Bootleg in breathable high quality oil nubuck leather. Durable non-marking outsole. ESD Approved to EN 61340-4-3: 2002.

Water-repellent / waterproof shoes and boots with midsole and toe cap
Footwear with an ESD label avoid electrostatic charging and are able to conduct away controlled static electricity from the body. This will avoid damages to, for example, sensitive electronic components.
Excellent traction with ultra slip resistant soles. Approved by both SRA (tested with soap on ceramics) and SRB (tested with glycerol on steel), which automatically achieves the best standard for slip-resistant soles, SRC.
EN ISO 20345 is a European standard for safety footwear that ensures that safety shoes, boots and sandals conform to the necessary requirements of working in areas where safety is a high priority. All safety footwear from MASCOT® FOOTWEAR is certified in accordance with EN ISO 20345.

Safety Class S3
ESD approved
Ultra Slip Resistant Sole
EN ISO 20345

Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
Light industry and logistics
This symbol helps you find footwear for such industries as electronics and assembly, warehousing, transport and related areas.